Home > News > Content
Product Categories

Slight Blockage Of The Injector Nozzle Can Also Affect Traffic Conditions

The quality of the Injector nozzle work, each engine on the power play a fundamental role. Due to poor fuel oil, the Injector nozzle work is not good, which makes the carbon accumulation in the cylinder serious; Cylinder barrel and piston ring are accelerated worn, resulting in unstable idle speed, fuel consumption rise, weak acceleration, difficulty in starting and excessive emissions, serious will completely block the Injector nozzle, damage the engine. Therefore, regular cleaning of the Injector nozzle, long-term cleaning or frequent cleaning Injector nozzle will cause a bad impact.

As to the timing of the cleaning, it depends on the vehicle condition and the quality of the fuel added, generally. Good vehicle conditions and good fuel quality can be extended to around 40,000 to 60,000 km. When there is a slight blockage in the Injector nozzle, it has some effect on the traffic. Sometimes, there will be a trouble like this: hang on a block, get off, the car will shake a little, wait for the high grade, speed up, such phenomenon will disappear again, assuming the various sensors on the car work normally, the throttle valve has been cleaned, the circuit is normal, that is likely to be a slight blockage of the Injector nozzle. But when the high gear accelerates, it is possible that the slight gelatin is blown away (dissolved) and the car's performance is restored. This slight blockage of the Injector nozzle can generally be done without cleaning. Because the slight gelatin can be dissolved. Therefore, in the daily driving, you should run at high speed to reduce the possibility of carbon accumulation. When gasoline is of poor quality or driving cars for a longer time, if don't clean the Injector nozzle for a long time, the blocking phenomenon will be more serious, leading to poor engine fuel injection, spray Angle and atomization, the engine idle speed, acceleration, or work full load condition is bad, make engine power, fuel consumption, exhaust emissions increased, even make the engine will not work. Therefore, the Injector nozzle should be cleaned and tested regularly to ensure that it works well.


Services & Products
S Injector NOZZLE
P/J injector NOZZLE
COMMON RAIL injector nozzle
PDN injector Nozzle
SD/DL injector Nozzle
Yanmar injector Nozzle
Contact Us
Tel: +86-530-5811907
Fax: +86-530-5811909
Add: No.398 kunming Road, Heze City,
Shandong Province China.
Email:htnozzle@163.com
Feedback